Lan Xing Email & Phone Number | u2022 Lead Engineer in Developing HSDS-U-Auto Hauler & HSDS-U-12T Suspensions for Chinese Market Responsibilities: Designed a new suspension to replace the existing U-Bolt version to reduce weight and simplify manufacturing process. Conduct FEA analysis to verify the design. Modify and optimize the design based on the analysis results. u2022 Conduct design review with Management to show the progress through the whole New Product Development process u2022 Worked closely with Manufacturing and R&D to obtain the best overall solutions of the designs u2022 Provide technical support for HSDS Design, Production and Sales. u2022 Key Design Engineer in Developing High Pressure, High Flow Centrifugal Air Compressor (DH) Responsibilities: Designed and analyzed major components of the compressor. Conducted structural, modal and thermal analysis using ANSYS. Modified the design based on the analysis results to meet the design standards u2022 Main Design Engineer in EH Cost Reduction Project Responsibilities: Redesign the base skid, aftercooler support and drain system using 3D modeling software. Improved the assembly efficiency by 50% and largely reduced the manufacturing and labor cost u2022 Lead Engineer in Designing One Test Stand for Multiple Units (DH, EH and C frame) Responsibilities: Designed air pipes, lube system and structural components based on the testing requirements and manufacturability. Worked with manufacturing engineer and suppliers for component design and selection u2022 Worked and Coordinated with Cross-functional Team Responsibilities: Conducted design reviews and kept track of the project progress with different departments u2022 Highly involved in Prototype Testing Responsibilities: Created prototype drawings, wrote testing procedures and reports. Worked closely with manufacturing engineer and testing engineer and assisted in the testing when needed u2022 Assisted Manufacturing and Production Responsibilities: Identified the root causes of the production issues and provided solution. Designed tooling to ensure safety and productivity for manufacturing operations. u2022 Set up Bill of Materials (BOM), created and released drawings, established engineering transmittals, etc.u2022 Manage the product files from different facilities with the Database u201cNetSuiteu201d u2022 Analyze the data from the rejected files using JMP to find the failure distribution of the product u2022 Test the samples and analyze the reasons causing the problems. Designed and fabricated a pressure sensor using piezoelectric materials Generated a FEA model of the pressure sensor with ANSYS to analysis the pressure and voltage Carried out experiment to test the device and verify the relationship between pressure and voltage. Research and Development Department Coordinated with the Manager of Product Developments and IT Engineers in the implementation of the Database u201cSpideru201d Identified the strength and weakness of the database and optimized the workflow Presented and adjusted the new process in cooperation with Lessons Learned supervisors and owner Operation Department Optimized and created standards which can be used as criteria for building new facilities Developed a new footprint file to used as how to choose plants. uf06c Focused on the experimental study of Hydrogen Hydrate Growth Enhancement for energy storage uf06c Carried out experiment to analysis the influence of carbon materials to hydrogen storage of TBAB hydrate uf06c Designed Ground Source Heat Pump System for a building using heat transfer, thermal dynamics and fluid dynamics. Assembling Department uf06c Learned and observed the whole air-conditioner units assembling and manufacturing process uf06c Participated in assembling of the thermal barrier package Research & Development Department Intern uf06c Participated in the air-conditioner units design mainly working on 2D CAD graphing uf06c Improved the manufacture efficiency and reduced the cost by revising a small part of the heat exchanger. uf06c Learned manufacturing process like casting, welding, molding uf06c Casted a model plane using sand mold and aluminum uf06c Operated Numerical Control Machine and learned Programming.

Lan Xing

u2022 Lead Engineer in Developing HSDS-U-Auto Hauler & HSDS-U-12T Suspensions for Chinese Market Res...
Canton, Ohio, United States

*50 free lookup(s) per month.

No credit card required.

Lan Xing’s Email lxing@hendricksonintl.com

Lan Xing’s Phone Numbers +1 442-296-****

Get LAN’s Phone Number (For Free)

Social Media

Lan Xing’s Location Canton, Ohio, United States

Lan Xing’s Current Industry Hendrickson

Not the Lan Xing you were looking for?

Find accurate emails & phone numbers for over 700M professionals.

Work Experience

Hendrickson

Product Engineer

2018-04-01 00:00:00 - Present

Fs Elliott

Product Engineer

2014-11-01 00:00:00 - 2018-04-01 00:00:00

Akustica

Product Engineering Intern

2014-09-01 00:00:00 - 2014-11-01 00:00:00

University Of Pittsburgh

Research Assistant

2013-09-01 00:00:00 - 2014-04-01 00:00:00

Faurecia Automotive Exterior

Mechanical Engineer Intern

2013-05-01 00:00:00 - 2013-08-01 00:00:00

University Of Shanghai For Science And Technology

Research Assistant

2012-01-01 00:00:00 - 2012-06-01 00:00:00

Lotus Air Conditioner Factory

Hvac Engineer Intern

2010-06-01 00:00:00 - 2010-08-01 00:00:00

Factory Of University Of Shanghai For Science And Technology

Mechanist

2009-06-01 00:00:00 - 2009-07-01 00:00:00

Skills

No Skills Available

Languages

No Languages Available

FAQ About Lan Xing

Lan Xing is located at
Canton, Ohio, United States

Lan Xing is a u2022 Lead Engineer in Developing HSDS-U-Auto Hauler & HSDS-U-12T Suspensions for Chinese Market Responsibilities: Designed a new suspension to replace the existing U-Bolt version to reduce weight and simplify manufacturing process. Conduct FEA analysis to verify the design. Modify and optimize the design based on the analysis results. u2022 Conduct design review with Management to show the progress through the whole New Product Development process u2022 Worked closely with Manufacturing and R&D to obtain the best overall solutions of the designs u2022 Provide technical support for HSDS Design, Production and Sales. u2022 Key Design Engineer in Developing High Pressure, High Flow Centrifugal Air Compressor (DH) Responsibilities: Designed and analyzed major components of the compressor. Conducted structural, modal and thermal analysis using ANSYS. Modified the design based on the analysis results to meet the design standards u2022 Main Design Engineer in EH Cost Reduction Project Responsibilities: Redesign the base skid, aftercooler support and drain system using 3D modeling software. Improved the assembly efficiency by 50% and largely reduced the manufacturing and labor cost u2022 Lead Engineer in Designing One Test Stand for Multiple Units (DH, EH and C frame) Responsibilities: Designed air pipes, lube system and structural components based on the testing requirements and manufacturability. Worked with manufacturing engineer and suppliers for component design and selection u2022 Worked and Coordinated with Cross-functional Team Responsibilities: Conducted design reviews and kept track of the project progress with different departments u2022 Highly involved in Prototype Testing Responsibilities: Created prototype drawings, wrote testing procedures and reports. Worked closely with manufacturing engineer and testing engineer and assisted in the testing when needed u2022 Assisted Manufacturing and Production Responsibilities: Identified the root causes of the production issues and provided solution. Designed tooling to ensure safety and productivity for manufacturing operations. u2022 Set up Bill of Materials (BOM), created and released drawings, established engineering transmittals, etc.u2022 Manage the product files from different facilities with the Database u201cNetSuiteu201d u2022 Analyze the data from the rejected files using JMP to find the failure distribution of the product u2022 Test the samples and analyze the reasons causing the problems. Designed and fabricated a pressure sensor using piezoelectric materials Generated a FEA model of the pressure sensor with ANSYS to analysis the pressure and voltage Carried out experiment to test the device and verify the relationship between pressure and voltage. Research and Development Department Coordinated with the Manager of Product Developments and IT Engineers in the implementation of the Database u201cSpideru201d Identified the strength and weakness of the database and optimized the workflow Presented and adjusted the new process in cooperation with Lessons Learned supervisors and owner Operation Department Optimized and created standards which can be used as criteria for building new facilities Developed a new footprint file to used as how to choose plants. uf06c Focused on the experimental study of Hydrogen Hydrate Growth Enhancement for energy storage uf06c Carried out experiment to analysis the influence of carbon materials to hydrogen storage of TBAB hydrate uf06c Designed Ground Source Heat Pump System for a building using heat transfer, thermal dynamics and fluid dynamics. Assembling Department uf06c Learned and observed the whole air-conditioner units assembling and manufacturing process uf06c Participated in assembling of the thermal barrier package Research & Development Department Intern uf06c Participated in the air-conditioner units design mainly working on 2D CAD graphing uf06c Improved the manufacture efficiency and reduced the cost by revising a small part of the heat exchanger. uf06c Learned manufacturing process like casting, welding, molding uf06c Casted a model plane using sand mold and aluminum uf06c Operated Numerical Control Machine and learned Programming.

Lan Xing currently works in the Hendrickson |

No Languages Available

Lan Xing has prior
experience in the following industries:
Fs Elliott | Akustica | University Of Pittsburgh | Faurecia Automotive Exterior | University Of Shanghai For Science And Technology | Lotus Air Conditioner Factory | Factory Of University Of Shanghai For Science And Technology

Lan Xing has the following professional experience:
Hendrickson | Fs Elliott | Akustica | University Of Pittsburgh | Faurecia Automotive Exterior | University Of Shanghai For Science And Technology | Lotus Air Conditioner Factory | Factory Of University Of Shanghai For Science And Technology