ArendJan Beltman Email & Phone Number | In 1994 I graduated for Control Engineering in the Faculty of Electrical Engineering, Mathematics and Computer Science at the University of Twente. At Philips, I got familiar with lumped mass modeling techniques for machine dynamics. It allows early performance validation for mechatronical designs. In the field of electronics I developed resonant switched mode power amplifier modules for (linear) motors. At CCM (Centre for Concepts in Mechatronics, since 2014 part of Sioux Group) I started off as a system designer and subsequently became project leader. Presently I spend part of my time as manager of the mechatronics department of Sioux CCM. Additionally I’m an account manager. The remaining time I contemplate the ‘technological assets’ (knowledge, skills and tooling) within Sioux Systems business unit. I facilitate the process of continuous improvement of our operational excellence and technological proposition. I get energized by a development processes where conceptual choices in the field of electrical layout and machine dynamics result in border-braking performance. In many cases state-of-the-art control engineering is performed using a novel approach found at www.saxcs.nl. Sioux offers an inspiring, well equipped environment to develop equipment and products that meet both hightech and business-economical challenges. Project examples can be found in the field of laser dicing, ultra-wide flatbed inkjet printers and a generic substrate carrier (GSC) for high registration accuracy, laser-beam recording for blu-ray mastering, wafer handling for EUV lithography and autonomous feature detection using digital microscopy (optionally using fluorescence and/or high speed vision). Areas of expertise: Technology Management Modelling dynamic and/or quasi-static systems Development of (electronic and/or mechanical) drive strategies (Embedded) controller design Implementation of (control) solutions Electrical layout of system architecture System setup & integration

ArendJan Beltman

In 1994 I graduated for Control Engineering in the Faculty of Electrical Engineering, Mathematics an...
Eindhoven, North Brabant, Netherlands

*50 free lookup(s) per month.

No credit card required.

ArendJan Beltman’s Email arendjan_beltman@sioux.eu

ArendJan Beltman’s Phone Numbers

Get ARENDJAN’s Phone Number (For Free)

Social Media

ArendJan Beltman’s Location Eindhoven, North Brabant, Netherlands

ArendJan Beltman’s Current Industry Sioux Technologies

ArendJan Beltman’s Prior Industry Ccm Centre For Concepts In Mechatronics | Ccm | Philips Electronics | Nedap | Institute For Microelectronics Stuttgart

Not the ArendJan Beltman you were looking for?

Find accurate emails & phone numbers for over 700M professionals.

Work Experience

Sioux Technologies

Manager Mechatronics / Program Manager Technology

2017-01-01 00:00:00 - Present

Ccm Centre For Concepts In Mechatronics

Manager Mechatronics / CTO

2006-04-01 00:00:00 - 2016-12-01 00:00:00

Ccm

Principal System Designer

1998-04-01 00:00:00 - 2006-04-01 00:00:00

Philips Electronics

Development engineer in Mechatronics

1994-06-01 00:00:00 - 1998-04-01 00:00:00

Nedap

Stagiaire (Multipas systeem, 1990)

1990-01-01 00:00:00 - 1991-01-01 00:00:00

Institute For Microelectronics Stuttgart

Trainee

1990-01-01 00:00:00 - 1990-01-01 00:00:00

Skills

No Skills Available

Languages

No Languages Available

FAQ About ArendJan Beltman

ArendJan Beltman is located at
Eindhoven, North Brabant, Netherlands

ArendJan Beltman is a In 1994 I graduated for Control Engineering in the Faculty of Electrical Engineering, Mathematics and Computer Science at the University of Twente. At Philips, I got familiar with lumped mass modeling techniques for machine dynamics. It allows early performance validation for mechatronical designs. In the field of electronics I developed resonant switched mode power amplifier modules for (linear) motors. At CCM (Centre for Concepts in Mechatronics, since 2014 part of Sioux Group) I started off as a system designer and subsequently became project leader. Presently I spend part of my time as manager of the mechatronics department of Sioux CCM. Additionally I’m an account manager. The remaining time I contemplate the ‘technological assets’ (knowledge, skills and tooling) within Sioux Systems business unit. I facilitate the process of continuous improvement of our operational excellence and technological proposition. I get energized by a development processes where conceptual choices in the field of electrical layout and machine dynamics result in border-braking performance. In many cases state-of-the-art control engineering is performed using a novel approach found at www.saxcs.nl. Sioux offers an inspiring, well equipped environment to develop equipment and products that meet both hightech and business-economical challenges. Project examples can be found in the field of laser dicing, ultra-wide flatbed inkjet printers and a generic substrate carrier (GSC) for high registration accuracy, laser-beam recording for blu-ray mastering, wafer handling for EUV lithography and autonomous feature detection using digital microscopy (optionally using fluorescence and/or high speed vision). Areas of expertise: Technology Management Modelling dynamic and/or quasi-static systems Development of (electronic and/or mechanical) drive strategies (Embedded) controller design Implementation of (control) solutions Electrical layout of system architecture System setup & integration

ArendJan Beltman currently works in the Sioux Technologies |

No Languages Available

ArendJan Beltman has prior
experience in the following industries:
Ccm Centre For Concepts In Mechatronics | Ccm | Philips Electronics | Nedap | Institute For Microelectronics Stuttgart

ArendJan Beltman has the following professional experience:
Sioux Technologies | Ccm Centre For Concepts In Mechatronics | Ccm | Philips Electronics | Nedap | Institute For Microelectronics Stuttgart